Hallo,
ich habe einen dedizierten Server bei Hetzner, auf dem ich Proxmox installiert habe. Ich habe 2 VMs, 1 Linux und 1 Sophos XG für VPN. Außerdem habe ich eine zusätzliche IP-Adresse für den WAN-Port gekauft und ein LAN mit 10.10.10.1/24.
Leider kann ich die SSL VPN nicht erreichen. Ich weiß nicht genau, was ich in der Konfiguration falsch gemacht habe.
Ich bin unsicher, ob in den Global Settings der SSL VPN etwas nicht stimmt.
Viele Grüße
Is SSL VPN enabled in on the WAN zone in Administration → Device Access?
Hello, Could you share logs from client side and FW side under Log Viewer > VPN? Further, was this previously working or this is the first time you set this up? if this is working before, are there any change on config/firmware upgrade/network change prior the issue? Could you also share at least a high level diagram of your setup for to visualize the flow of access? Also, are you performing a Remote access SSL VPN from external → ISP NAT Router → Sophos Firewall → Resources? Kindly confirm. Thank you ^RA
Yes it is sorry for the late reply
Hey sorry for the late response. The Setup is for the first time, it is also my first time setting up a firewall. The setup looks like this.
I have a hetzner server with 2 public ips and virtualized the Server to a proxmox. On the proxmox I have 2 vms, 1 is just a basic Linux with a private ip address. The other VM is the Sophos with 2 virtual NICs, one has the other public address from hetzner and the private address.
I can reach over the WAN Port the VPN Portal is there anything I need to configure in the ssl vpn config file?